The hidden composite decking clips and screws are designed to fit in the rebates you see on the decking boards. We predominantly provide a range of stainless clips as a preference, and at the same time will supply the more common plastic fixing clips. All our composite board clips are 304 stainless steel as are the screws we provide.
We designed our steel fixing clips to create a gap of 3mm only. A smaller gap such as this is often preferred because it looks more appealing. Our plastic clips achieve a slightly wider 5mm gap and give a markedly different look. Depending on your situation a 3mm gap may be required for building code in certain fire risk zones.
You will make your installation easier and faster when you use a hidden clip and screw system. The boards are laid with no damage to their integrity whatsoever. We have taken the time to source a selection of decking clips that eliminates the need to screw through the boards in almost all installations.
The deck looks much cleaner when fixed in this way and there will never be any issues for raised fixings catching bare feet.
You can use the composite decking clips on timber or steel joists. We provide screws that are stainless and designed for timber. They can be used in steel if the steel is pre-drilled. We also have a steel fixing screw in our range.

This is a 304 stainless clip, manufactured to provide a 3mm board gap it is a robust fixing that is easy to use. It has four fixing points for maximum holding and allows fixing of butt ends to a joist.

Used for fixing the composite boards on the deck installation. This clip provides a 5.5mm gap between boards.

The starter clip is normally used to fix the first board run on the installation and hold the outside edge in place without direct fixing.

This can be used in the same manner as the starter clip, with the flexibility of fixing on the vertical face of the joist. It can also add some flexibility when installing picture frame decks, steps, walkways and other designs. This also allows the outside board to be easily taken off at any time.

This picture frame clip helps to facilitate the installation of a picture frame deck without direct fixing.

This is a 304 stainless screw and finished with a black ruspic for extra protection against corrosion.
This is a #6 guage to fit in the narrow gap required for the fixing clips. They are stocked in 35mm and 25mm lengths, the shorter lengths being handy for old hardwood fixing and with our 25mm deep composite battens used on very low level installations to concrete.
A Standard T15 drive to make sure the jobs as easy as it can be.

This is a 304 stainless screw and finished with a black ruspic for extra protection against corrosion.
This is a #6 guage to fit in the narrow gap required for the fixing clips.
They are stocked in 20mm and 30mm lengths, and are used to secure the clips to aluminium and light guage steel joists.
A Standard T15 drive to make sure the jobs as easy as it can be.




These composite decking screws are designed for direct fixing the composite boards into timber joists. Sometimes the hidden clips are just not suitable on complex installs and spaces so these are an excellent product to have ready.
They are 58mm #10 guage 304 stainless screw. Set at this length for securing down 23mm thick composite with 35mm of timber fixing. Secure enough, not too long as to be wasted.
They are ceramic coated for aethetic reasons, and of course that provides addititional protection from corrosion.
We offer a pure white decking screw, perfect for the matching with our Elite White boards, and for general timber installations where a white screw is advantageous.
We also have a brown decking screw, technically called a bronze colour it is for matching the darker timbers and they can also be used on Merbau or similar timbers.
The black decking screw is suitable for the dark greys and Charcoal boards and a great all round fixing screw where timber will be stained dark.
They are engineered with a revese thread at the top of the shanke to allow a cleaner install into composite and ensure the deck board locks tightly against the joist.
The drive is a star drive to keep a clean positive install.
We sell these in trade tubs for 180.00 per thousand inc gst in order to to keep them really competetive for the regular users.
We will split down into 100’s for our decking customers at 25.00, we know for a single job you might not need a thousand.
Composite decking expands and contracts more with temperature changes than traditional timber. Hidden clips hold the boards securely to the joists while allowing them to move naturally without splitting, warping, or damaging the boards. They also leave a clean, fastener-free surface with no exposed screw heads, making the deck safer for bare feet
We supply four types of hidden fasteners with 304 stainless steel screws to suit your preferred finish.
Yes, you can do this if absolutely necessary, and you must pre drill the boards, and for best results, countersink before fixing the board.
Installing decking with a hidden fastening system creates a clean, smooth surface. Rather than installing screws through the top of every deck board, clips are attached to the joists and pin down boards using the rebate in the edges. It is also important to use a decking clip system to allow the boards to contract and expand easily.
No, this is simply not recommended. There must be some form of joist to fix the boards too. In low height situations then there are options that we are happy to discuss with you personally.