Don’t know which Composite Decking Clip to use? Give us a call on 📞0444 545 156 so we can help you out!
Composite Decking Clips or Composite Decking Fixing Clips
“Where quality meets value"
HIDDEN FIXING CLIPS ARE THE PREFERRED AND RECOMMENDED METHOD OF SECURING COMPOSITE DECKING BOARDS.
The hidden composite decking clips are designed to fit in the rebates you see on the decking boards. We predominantly provide a range of stainless clips as a preference, and at the same time will supply the more common plastic fixing clips. All our composite board clips are 304 stainless steel as are the screws we provide.
We designed our steel fixing clips to create a gap of 3mm only. A smaller gap such as this is often preferred because it looks more appealing. Our plastic clips achieve a slightly wider 5mm gap and give a markedly different look. Depending on your situation a 3mm gap may be required for building code in certain fire risk zones.
You will make your installation easier and faster when you use a clip system. The boards are laid with no damage to their integrity whatsoever. We have taken the time to source a selection of clips that eliminates the need to screw through the boards in almost all installations.
The deck looks much cleaner when fixed in this way and there will never be any issues for raised fixings catching bare feet.
You can use the composite decking clips on timber or steel joists. We provide screws that are stainless and designed for timber. They can be used in steel if the steel is pre-drilled. We also have a steel fixing screw in our range.
Plastic securing clip
Used for fixing the composite boards on the deck installation. This clip provides a 5.5mm gap between boards.
Stainless starter clip
The starter clip is normally used to fix the first board run on the installation and hold the outside edge in place without direct fixing.
Steel composite board clip
This is a 304 stainless clip, manufactured to provide a 3mm board gap it is a robust fixing that is easy to use. It has four fixing points for maximum holding and allows fixing of butt ends to a joist.
Vertical clip.
This can be used in the same manner as the starter clip, with the flexibility of fixing on the vertical face of the joist. It can also add some flexibility when installing picture frame decks, steps, walkways and other designs. This also allows the outside board to be easily taken off at any time.
Framing Clip
This picture frame clip helps to facilitate the installation of a picture frame deck without direct fixing.
All our clips are 26c each.
Quality Assurance
We at Sun Decking have a simple purpose: To keep our business simple to provide you, our customers, with quality products at outstanding value for money.
The manufacturer we work with has been creating WPC products for over 20 years.
They have a dedicated quality and research team in their business and successfully export to over 50 countries, now we are working with them. They are for this first time supplying the Australian market.
Their confidence in the product durability and longevity is strong, so is ours. That is why the manufacturers have a ten-year limited product replacement warranty and why we can reciprocate with the same.
The warranty is a limited warranty against rot, termite infestations, splintering and product failure.
Download Our Sun Decking Warranty Here
The best way to clarify our product characteristics and their suitability for your installation is to talk to us.
Are you in Queensland, Brisbane, Gold Coast, Sunshine Coast and Northern NSWand would like to invest in Composite Decking Clips? Give us a call on 📞0444 545 156.
Should I Use Hidden Composite Decking Clips?
Installing decking with a hidden fastening system creates a clean, smooth surface. Rather than installing screws through the top of every deck board, clips are attached to the joists and pin down boards using the rebate in the edges. It is important to use a hidden fastening system.
Can You Screw Down Composite Decking?
Yes, you can do this if absolutely necessary, and you must pre drill the boards, and for best results, countersink before fixing the board.
Can You Screw Decking Straight To Concrete?
No, this is simply not recommended. There must be some form of joist to fix the boards too. In low height situations then there are options that we are happy to discuss with you personally.
WHY CHOOSE SUN DECKING
Quality
We have spent many years sourcing and quality testing the best composite decking available for Australian conditions, so you don’t have to.
Warranty
All our products come with a 15 year warranty to provide assurance of quality
Family Owned
We are an Australian family owned business that strives to provide excellent personal service to our customers.
Fast
Our factory direct model ensures we always have stock that can be delivered within 48 hours.
Value
Our simple business model ensures our clients receive factory direct pricing by cutting out unnecessary middlemen.
Wide Range
Based in Brisbane we supply and deliver our range of premium composite decking across Queensland and Northern NSW.
Do you own a property in Brisbane, Queensland, Northern NSW and looking for high quality yet affordable composite decking solutions? Give us a call on 📞 0444 545 156. We are looking forward to delivering you with our stylish, practical, economical and durable composite decking options.
